FRP

Samsung SM-J120G FRP Unlock File: Odin

Samsung SM-J120G FRP Unlock using Odin tool:

• Samsung SM-J120G FRP File
• Odin tool
• Samsung Kies

How to Flash SM-J120G:

Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press volume down, Power & Menu cable to shift in download mode
• Now open the Odin flash tool
• Select Samsung SM-J120G FRP File.
• Select the Odin tool and open it
• Click AP or PDA then select AP File
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own

Samsung SM-J210F FRP Unlock File: Odin

Samsung SM-J210F FRP Unlock using Odin tool:

• Samsung SM-J210F FRP File
• Odin tool
• Samsung Kies

How to Flash SM-J210F:

Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press volume down, Power & Menu cable to shift in download mode
• Now open the Odin flash tool
• Select Samsung SM-J210F FRP File.
• Select the Odin tool and open it
• Click AP or PDA then select AP File
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.

Samsung SM-J260G U4, U3 & U2 FRP Unlock File

Samsung SM-J260G Binary 2, Binary 3 & Binary 4 FRP Unlock using Odin tool:

• J260GDDU4ASH2 FRP File 
• J260GDDU3ASH2_FRP_File
• Samsung J260g FRP Binary 2
• Odin tool
• Samsung Kies

How to Flash SM-J260G to unlock FRP:

Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press both volume keys & connect usb cable to shift in download mode
• Now open the Odin flash tool
• Select Samsung SM-J260G FRP File.
• Select the Odin tool and open it
• Click AP or PDA then select AP File
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.

Vivo Y93 FRP & Pattern Unlock using SP Flash Tool

Vivo Y93 DA & Auth with FRP & Pattern File: Download

Steps to Select DA & Auth File to remove FRP & Pattern in Vivo Y93 MTK Phones.

1- Download SP Flash Tool & Run.

2- Replace DA file with file in the Folder named DA_PL_MT6762_0321.

3- Now, choose Auth File.

4- Select Flash File.

5- Switch Off, Remove Battery & Connect phone.

It will reset pattern in Vivo Y93.

To Remove FRP Lock in Vivo Y93.

All setup should be the same as for the Pattern remove.

then Head over to Format TAB in SP Flash Tool.

and enter address: 0x5588000
0x100000

& Click on Start & Connect Phone.

It will reset the FRP within Vivo Y93.

Vivo Y91i FRP & Pattern Unlock using SP Flash Tool

Vivo Y91i DA & Auth with FRP & Pattern File: Download

Steps to Select DA & Auth File to remove FRP & Pattern in Vivo Y91i MTK Phones.

1- Download SP Flash Tool & Run.

2- Replace DA file with file in the Folder named DA_PL_MT6762_0321.

3- Now, choose Auth File.

4- Select Flash File.

5- Switch Off, Remove Battery & Connect phone.

It will reset pattern in Vivo Y91i.

To Remove FRP Lock in Vivo Y91i.

All setup should be the same as for the Pattern remove.

then Head over to Format TAB in SP Flash Tool.

and enter address: 0x5588000
0x100000

& Click on Start & Connect Phone.

It will reset the FRP within Vivo Y91i

Vivo Y91 FRP & Pattern Unlock using SP Flash Tool

Vivo Y91 DA & Auth with FRP & Pattern File: Download

Steps to Select DA & Auth File to remove FRP & Pattern in Vivo Y91 MTK Phones.

1- Download SP Flash Tool & Run.

2- Replace DA file with file in the Folder named DA_PL_MT6762_0321.

3- Now, choose Auth File.

4- Select Flash File.

5- Switch Off, Remove Battery & Connect phone.

It will reset pattern in Vivo Y91.

To Remove FRP Lock in Vivo Y91.

All setup should be the same as for the Pattern remove.

then Head over to Format TAB in SP Flash Tool.

and enter address: 0x5588000
0x100000

& Click on Start & Connect Phone.

It will reset the FRP within Vivo Y91

Huawei FRP Bypass

Not any boxes currently support FRP unlock in Huawei phones neither MRT, Miracle Huawei or NCK.

But using Bypass, you can unlock the frp in Huawei phones running latest software update.

Steps to Remove Huawei FRP using Bypass:

• Simply Follow the steps in start up and connect phone with WiFi.
• Make sure the huawei phone is connected to internet.
• After getting connected to internt, goto Emergency calling and Dial *#*#1357946#*#*.

• Setting will open.

• Open Setting Menu by scrolling left to right and click on Setting Home.

• Now you had to open System, lying on the last.
• Out of the options appearing, click on Reset -> Reset All Setting and reset the device.
• Now Hold Power key & Reboot the device.

FRP will be unlocked without using Talkback method.

Nokia 1 TA-1066 FRP Unlock

In earlier days, Nokia 1 TA-1066 can be unlocked with Miracle box. But with the latest update, Miracle fails to support FRP.

While unlocking FRP with Miracle box it display, Unstable COM Port.

Nokia 1 TA-1066 FRP File: Download 

Steps to Unlock FRP in Nokia 1 TA-1066:

1- Run SP Flash tool.

2- Select DA File as MTK_AllInOne_DA.

3- Load Flash File.

4- Double Click on Location under preloader and select preloader file.

5- Now Open Format Tab under SP Flash Tool and select Manual Address.

Enter, physical_start_addr: 0x5A80000
partition_size: 0x100000

6- Click on Start and connect phone holding both volume key.

7- FRP will be reset..

Lenovo A2016A40 FRP unlock Using SP Flash Tool

This post covers detailed info on how to unlock FRP in Lenovo A2016A40 using SP Flash Tool.

1- Download Lenovo A2016A40 Flash File with tools & Drivers.

2- Install Driver then run SP Flash Tool.

3- Select DA_SWSEC.bin in Download Agent & then load scatter file.

4- Open Format Tab in SP Flash Tool then select Manual Format Flash.

5- Manually enter address.

In Begin Address: 0x6a00000

Format Lenght: 0x100000

6- Click on Start & Switch off Phone then holding both Volume keys or without any Key. Connect the phone to PC.

7- Disconnect Phone from PC & Enter into Recovery mode then wipe data once to unlock FRP.

Note: It will reset the FRP lock from the phone & If Tool DL Image failed appears on the screen on Startup then it has to be flashed

Samsung SM-J600G FRP Unlock using ODIN

Samsung SM-J600G FRP Unlock using Odin tool:

• Samsung J600G Combination file 
• Samsung J600G Flash File
• Odin tool
• Samsung Kies

1- Flash Combination file.
Make sure your device is atleast 30 percent charged to perform flashing.

• Switch off the mobile
• Press volume down + Volume UP & Connect USB Cable.
•  Now open the Odin flash tool.
•  Select Samsung SM-J600G Combination file in AP
• Flash the Phone
• After Flash, Switch on Device.
• Factory Mode will appear.
• Go to Setting-> About Phone-> Build No.
• Click on build no. 8 times to enable developer mode.
• Enable USB Debugging and Enable OEM Unlocking.
• Switch Off phone.

2- Flash Stock ROM

Make sure your device is atleast 30 percent charged to perform flashing.

• Switch off the mobile
• Press volume down + Volume UP & Connect USB Cable.
•  Now open the Odin flash tool.
•  Select Samsung SM-J600G AP or PDA in AP.
• Bootloader in BL.
• Home CSC in CSC.
• Cp file in CP.
• Flash the Phone

FRP Lock will get removed from the phone.

Redmi Note 5 Pro Mi Account & FRP Unlock using MI Tool

Download Xiaomi Redmi Note 5 Pro Mi Account & FRP File:

This tool does not require Mi Authorization and can be used to unlock Mi Account & FRP in Redmi Note 5 Pro.

• Redmi Note 5 Pro FRP File
• Mi Account Tool without Login

How to Unlock FRP in Xiaomi Redmi Note 5 Pro:

Download Xiaomi Redmi Note 5 Pro FRP File
1- Connect phone through USB cable to PC and unplug battery.
2- Short Test Point and connect battery.
3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.
4- Download & run MI Flash Tool
5- Place the Flash File on Desktop.
6- Assign the Folder path & choose Clean All & Lock.
7- Click on refresh & then tap Flash button.

Samsung SM-J810G FRP Unlock using ODIN

Samsung SM-J810G FRP Unlock using Odin tool:

• Samsung J810G Combination file 
• Samsung J810G Flash File
• Odin tool
• Samsung Kies

1- Flash Combination file.
Make sure your device is atleast 30 percent charged to perform flashing.

• Switch off the mobile
• Press volume down + Volume UP & Connect USB Cable.
•  Now open the Odin flash tool.
•  Select Samsung SM-J810G Combination file in AP
• Flash the Phone
• After Flash, Switch on Device.
• Factory Mode will appear.
• Go to Setting-> About Phone-> Build No.
• Click on build no. 8 times to enable developer mode.
• Enable USB Debugging and Enable OEM Unlocking.
• Switch Off phone.

2- Flash Stock ROM

Make sure your device is atleast 30 percent charged to perform flashing.

• Switch off the mobile
• Press volume down + Volume UP & Connect USB Cable.
•  Now open the Odin flash tool.
•  Select Samsung SM-J810G AP or PDA in AP.
• Bootloader in BL.
• Home CSC in CSC.
• Cp file in CP.
• Flash the Phone

FRP Lock will get removed from the phone.